Solar on your balcony. Braced and locked on.
Sunhitch makes the mount that holds your plug-in solar panel on a railing, a ledge or a wall. No drilling on railings, two braces underneath, and every knob locks.
Three steps.
Clamp it on
It will arrive assembled and pre-set for your panel. On a railing, slide the jaw in until it clicks and turn one knob: no tools, nothing to drill, and it comes off clean when you move.
Grip most panels
Soft-padded jaws are designed to hold the edge of most panels: flexible sheets, folding camping panels and framed rigid panels. Tilt it in 20° steps for the best sun.
Lock it down
Held at the top and braced at the bottom, with steel pins in every joint. Lock cups cover every knob and one steel cable per side ties them together, to make your panel much harder to take.
Designed to fit the panels people are buying
Fit is based on each panel's published size and edge thickness. We haven't tested every model yet.
Try it on yours.
Pick where it goes and which panel you have. Each panel is shown at its real size, with every bolt and both bottom braces. Drag to look around. To zoom, move the pointer over the house, then scroll.
One kit per panel. More panels? Take a 2-pack or 4-pack.
Every kit holds one panel at the top and bottom and comes with stainless hardware. Prices are planned for launch.
Railing Kit
For balcony railings: clamps to the top rail and braces to the balusters.
Ledge Kit
For ledges, sills, wall copings and wood caps that stick out at least 8 cm past the wall below.
Wall Kit
Screws to a wall, fence or deck: 8 screws, no wall plugs.
Lock Pack
Lock cups for every knob plus two steel lock cables, one per side. Bring just two small padlocks.
Pro Aluminum
All-aluminum mount for big 400–450 W glass panels up to 24 kg, braced top and bottom. Free shipping, Lock Pack included.
Built from UV-stable ASA engineering plastic and stainless steel, with hardened steel pins in every joint and self-locking nuts.
Good to know.
Will it fit my panel?
The Standard kits are designed for panel edges from 1 to 42 mm and panels up to about 10 kg: flexible, folding and most framed 100–300 W panels. For big 400 W+ rigid panels, Pro Aluminum is coming soon.
Will the Ledge Kit fit my ledge?
It's designed to grip ledges 1–84 mm thick that overhang the wall below by about 8 cm or more, like most window sills, wall copings and deck caps. The clamp and its lock sit under that overhang. For a flush wall, choose the Wall Kit.
Will it fit my railing?
The railing clamp is designed for round top rails from about 15 to 74 mm across, square rails up to 50 mm and flat rails up to a 2×4. For wide wood caps, choose the Ledge Kit.
How long does it take to put up?
We're designing the Railing Kit to go up in about 15 minutes with no tools. Every mount arrives assembled and set to your panel, and the brace rods come cut to length.
What about storms?
Every kit holds the panel at its top and bottom edges, so the load is shared between the top mounts and the braces instead of hanging on one joint. Always add the included steel tether, and bring the panel in before a big storm.
Do I need a permit?
It depends on where you live and how you use your panel. Check your state and local rules, and your lease or HOA, before you install.
How does the lock work?
Each knob gets a cup that slides over it. One coated steel cable per side threads through every cup and closes with a single small padlock, so the whole kit locks with two padlocks. The knobs can't turn, and the bolts can't come out.
On a railing, a ledge and a wall.
Get first dibs on launch.
Tell us which kit you want and where you live. You'll be first in line when the kits are ready, and we'll email you before anything goes on sale.
No payment now. Reserving is free, and you can drop off the list anytime.
We only use this to contact you about Sunhitch. We never sell it. Unsubscribe anytime.